![]() Encryption – also according to the settings of a network, most likely AES. Authentication – the kind of authentication in the target network, most likely – WPA2. Communication mode – “Infrastructure” for connecting to a Wi-Fi router / access point, “Ad-hoc” for direct connection to a computer’s or laptop’s Wi-Fi adapter. SSID is the name of the network you’re connecting to. – Enter profile name, set connection type to “Computer” and interface type to “Wireless and Ethernet”, press “Next” Otherwise leave the password field blank, or tick “Reset password” and set a desired password – enter a password if it has been already set up previously. Select the “Add new profile” item in the list and press “Next” A new screen “Select a profile” will be shown once the connection is established. – the utility will take some time to connect to the camera. – select “Add / Edit profiles”, press “Next” – select the type of your Wi-Fi unit (WT-4 or WT-5), press “Next” – launch Wireless Transmitter Utility, press “Next” – connect the camera to a computer with USB cable, turn the camera on To do so you will need Nikon Wireless Transmitter Utility. Create a profile for connecting the camera to your network, if you don't have it. Automatic parameters will most likely work, if not – contact your network administrator.ġ. – enter network access key (password), press MENU to confirm – select “Enter 8-63 ASCII characters”, press ОК ![]() ![]() Note that WFT unit may not detect networks that occupy wireless channel higher than 7 – if it’s a wireless network – select your network name from the list. – EOS Utility (this is the only mode Helicon Remote will work with) Set Wi-Fi unit up and connect the camera to the network. ![]()
0 Comments
Leave a Reply. |